Non-structural joint or butt joint sealing of glass curtain wall
Joint sealing of aluminum curtain wall
Joint sealing between concrete, bricks, ceramics, plastics and metal plates
Product Details
Rheologic
0mm
Tack-free time
36min
Extrudability
108ml/min
Density
1.42g/ml
Shore A hardness
36
Ultimate Tensile Strength
0.79MPa
Maximum elongation
360%
Modulus at 100 % elongation
0.48MPa
Displacement capacity
±25%
Application
Non-porous surfaces must be cleaned with toluene or acetone before the sealant is applied.
Compatibility testing should be performed prior to use to confirm the suitability of the use of these materials when in contact with each other.
Smooth the sealant off with a scraper before it cures, being careful not to smooth away so much that it leaves a hollow, then carefully peel off the masking tape, also before the sealant fully cures.