aquarium installation & sealing, interior glass decoration and bonding
Product Details
Rheologic
0 mm
Tack-free time
8 min
Extrudability
4S
Density
1.03 g/ml
Shore A hardness
33
Ultimate Tensile Strength
0.62MPa
Maximum elongation
118%
Modulus at 60 % elongation
0.31MPa
Displacement capacity
±20%
Application
Non-porous surfaces must be cleaned with toluene or acetone before the sealant is applied.
Apply masking tape to the surfaces next to the joint to keep excess primer and sealant off areas where they are not intended.
Smooth the sealant off with a scraper before it cures, being careful not to smooth away so much that it leaves a hollow, then carefully peel off the masking tape, also before the sealant fully cures.
Compatibility testing should be performed prior to use to confirm the suitability of the use of these materials when in contact with each other.