High performance silicone weathering sealant ondlaza B996

High performance silicone weathering sealant  

  • One-component
  • Neutral-curing
  • Room Temperature Curing
  • High weathering resistance
  • High adhesion
  • Low modulus
 

High-rise, super high-rise glazed curtain wall non-structural bonding

Joint sealing of large-size metal (aluminum) glazed curtain wall

Joint sealing between concrete, bricks, ceramics, plastics and metal plates

Product Details

Rheologic

0 mm
Tack-free time

32 min
Extrudability

122 ml/min
Density

1.35g/ml
Shore A hardness

36
Ultimate Tensile Strength

0.82 Mpa
Maximum elongation

320%
Modulus at 100 % elongation

0.48 Mpa
Displacement capacity

± 25%

Application

Non-porous surfaces must be cleaned with toluene or acetone before the sealant is applied.

 

Compatibility testing should be performed prior to use to confirm the suitability of the use of these materials when in contact with each other.

 

Smooth the sealant off with a scraper before it cures, being careful not to smooth away so much that it leaves a hollow, then carefully peel off the masking tape, also before the sealant fully cures.