Used to joints sealing in dry hang for marble, granite curtain wall
Prefabricated concrete & prefabricated joint
Ceramic engineering joint
Product Details
Rheologic
0 mm
Tack-free time
47 min
Extrudability
93ml/min
Density
1.46 g/ml
Contamination
0 mm
Shore A hardness
49
Ultimate Tensile Strength
0.80 Mpa
Maximum elongation
210%
Modulus at 60 % elongation
0.53 Mpa
Displacement capacity
± 20%
Application
Non-porous surfaces must be cleaned with toluene or acetone before the sealant is applied.
Compatibility testing should be performed prior to use to confirm the suitability of the use of these materials when in contact with each other.
Smooth the sealant off with a scraper before it cures, being careful not to smooth away so much that it leaves a hollow, then carefully peel off the masking tape, also before the sealant fully cures.