Weathering sealant for doors and windows Bondlaza Y200

Bondlaza Y200 is a neutral-cure type, one-component sealant that exhibits excellent adhesion without primer on various substrates and suitable for window construction of various materials.  

  • Neutral cure
  • Good adhesion on wide range of substrates such as wood, PVC, metal
  • Medium modulus that can stand contraction and expansion
  • Easy to use as one component type
  • Excellent weatherability against sunlight, rain, snow, ozone
 

Medium modulus for a tough, flexible rubber cure when mixed producing a tenacious, structural watertight seal.

Short cure time reduces sealing production time with short time as low as 30 – 60 minutes.

Neutral cure reduces the chance of chemical reactions occurring with accessory components.

Very resistant to UV light, moisture, high temperature fluctuations, wind loads and other weather conditions provide the product an extremely long functional life.

Product Details

Rheologic

0
Tack-free time

0.5h
Extrudability

469ml/min
Elastic recovery

97%
Tensile properties

no damage
Tensile properties after cold drawing - hot pressing

no damage
Tensile properties after immersion in water

no damage
Weight loss

7.50%
Density

1.56g/cm3

Application

Application surface must be sound, clean, and dry.

 

After application, hands and exposed skin have to be washed immediately by using hand cleaner and water. Do not use solvents on skin.

 

Contact surfaces should be free of loose dirt, dust, oils, and any other contaminants. Uncured Bondlaza Y200 may be removed from tools or suitable solvent. Once cured, the material can only be removed mechanically.